Rockhopper II - User's Guide
Setup items
Interlace method
4.4.28 Printing direction menu
Set print head moving direction for printing.
Setup items
Direction
4.4.29 Repeat printing menu
Make settings for the repeat print.
Setup items
Repeat
Parameters
1 pass
1 pass Few
2 pass
4 pass
-
Parameters
UniDir
BiDir
-
Parameters
Times
Interval
-
Descriptions
Over printing is not performed.
Only gaps between lines are overwritten.
Over-printing is performed twice per 1 line.
Over-printing is performed four times per 1 line.
After setting, shift to the previous hierarchy menu.
4.4.23 Printing mode menu
Descriptions
Prints in one direction.
Prints bi-directionally.
After setting, shift to the previous hierarchy menu.
4.4.24 Printing mode setup menu
Descriptions
Set the number of repeats per line of printing.
4.4.30 Repeat times menu
Set interval time for the repeat print.
4.4.31 Interval time menu
After setting, shift to the previous hierarchy menu.
4.4.24 Printing mode setup menu
4-26
4 Handling the printer