Software Counter Initialization Menu - MUTOH Valuevet VJ-628X Maintenance Manual

5.6 Adjustment Menu
5.6.10

Software Counter Initialization Menu

This menu is used to initialize various software counters.
NOTE
The counters are initialized before delivery.Do not initialize them during
maintenance.
The software counters that can be initialized through this menu are as follows.
Counters to be initialized
Cumulative print timer
Ink consumption counter (each cartridge)
Ink amount count in the cap
Waste ink count
Use not-filled flag
Not-filled flag
Use First Start up flag
User definition first choice flag
Plug replacement count of 1L adapter
Debug Bit
Dot control counter
Pressing [Enter] key on Operation panel in the "Counter Reset?" screen performs the
software counter initialization.
Enter
Enter
Enter
After Initializing
5.6.10 Software Counter Initialization Menu
default
values
0
0
0
0
0
1
1
0xFFFFFFF
0
0
OFF
VJ628XE-M-00
308