Print Head Endurance (Nozzle Print) Menu - MUTOH Valuevet VJ-628X Maintenance Manual

5.11 Endurance Running Menu
5.11.8

Print Head Endurance (Nozzle Print) Menu

This menu is used to perform sequential printing to perform the endurance running of Print
head.
The available settings are shown below.
Set item Contents
Number of endurance Set the number of
running cycles endurance running
cycles.
• If the number of endurance running cycles is set to -1, Print heads continuously
repeats endurance running until cancel input is given from Operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-
digit number). If the number of cycles exceeds the maximum value, the counter
displays 99999999.
• printing method
speed: 320cps
wave form: VSD4
dot: Large
[Enter]
[Enter]
[Enter]
[Enter] /
[Cancel]
Completing endurance or [Cancel]
5.11.8 Print Head Endurance (Nozzle Print) Menu
Set value Remark
-1 to 10000 -
Endurance Count Pressing [+] /[-] key.
Performing endurance
4 color setting
running times of the endurance
VJ628XE-M-00
338