5.13 Media Initial Menu - MUTOH Valuevet VJ-628X Maintenance Manual

5.13 Media Initial Menu

5.13 Media Initial Menu
This menu is used to set the media detection.
Media detection default value for the standard mode (user mode) is used when starting
up the self diagnosis mode.
When it is set to Off, set the media width in the media width setting menu.
Setting items for the media detection menu are as follows:
Item
Top & Width Media width and top edge of the media are detected.
Width Media width is detected.
Off Media detection Off.
[Enter]
[+]
[Enter]/
[Cancel]
5.11.10 Endurance Running Check Menu
Contents
[-]
[Enter]
detecting the top of a media
and the width of a media
[Enter]
detecting the width of a media
[Enter]
Input media width
Press [+] or [-] key to change
the value
210mm to 630mm
VJ628XE-M-00
342