Table of Contents
Advertisement
6.1.3 Menu while printing
This menu shows up while printing. It is possible to perform a cleaning while printing when missing nozzles
are observed. It is also possible to change the distance adjust and to cancel the print.
No.
Position
1
First line
nd
2
2
line Left
nd
3
2
line Right
the
4
3
line Left
5
3the line Right
6.1.4 Changing the printer status
To change the printer status, follow the steps below.
6.1.4.1
Changing the status from normal to the setting menu display
Press either [MENU
•
The display of the operation panel changes to the Setting menu display.
6.1.4.2
Changing the status from the setting menu display to normal
Take one of the following actions when the printer is in the setting menu display to change the operation
panel display to normal one.
•
Press the [CANCEL] key on the operation panel.
•
Leave the printer for 3 minutes when the status is in the setting menu display.
•
Refer to the User's Guide for more information about the setup menu.
Downloaded From ManualsPrinter.com Manuals
1 →
Printing
2 →
Dist.adj
4 →
Cancel
Description
Displays the setting menu name currently set.
For Distance Adjusting while printing
For cleaning while printing
Cancels the printing
Pauses the printing
] or [MENU
] on the operation panel when the printer is in normal status.
* SetupMenu *
InkStatus
TestPrint
Notes
Viper TX – Operation Instructions
Cleaning
Pause
OriginSet
FabricSet
(1/7)
84
← 3
5
AP-75710, Rev. 1.1, 09/01/2008
Advertisement
Table of Contents
