Sample Printing Menu - MUTOH ValueJet VJ-1324 Maintenance Manual

5.9 Sample Printing Menu

5.9 Sample Printing Menu
This menu is used to print out a sample printing.
Diagnosis item
Adjust ALL Prints adjustment patterns.
Parameter ALL Prints out the set values of various adjustment parameters.
Log info. Prints the serious error history and smart chip log.
S/C Log info. Prints the smart chip Log
NOTE
If you have not registered the serial number of the machine, you must enter the number before
you can start the Parameter All printing.
5.7.13 Solid Print Menu
Contents
[Cancel]
[Enter]
[Enter]
Change to PG-Low
[Cancel]
After finishing warming up
After printing
Change to PG-High
[Cancel]
After finishing warming up
After printing
T I P
This is the same function as the"5.7.9 Test Printing Menu" p.5-51
For the screen and sample print of each item, refer
VJ1324E-M-02
[Enter]
[Enter]
When PG-High
If the temperature of the preheater is below 47 and
platen heater1,2 are below 42 C
* Pressing [Cancel] key stops control and start printing
When PG-
If the temperature of the preheater is below 47 and
platen heater1,2 are below 42 C
* Pressing [Cancel] key stops control and start printing
to"5.7.9 Test Printing Menu" p.5-51
P.5-58