Replacing Cursor Section; Releasing Carriage Lock - MUTOH Valuevet VJ-628X Maintenance Manual

3.8 Replacing Cursor section

3.8 Replacing Cursor section
This section describes the procedure to replace Cursor section.
3.8.1

Releasing Carriage Lock

When Carriage lock is released on software, Carriage moves to the origin position after power
is turned off. This section describes the procedure to release Carriage lock with power turned
off.
1
Push a carriage in the direction of an arrow by
hand.
NOTE
When you change into a headlock state
again, push Carriage in the direction of
the arrow.
3.8.1 Releasing Carriage Lock
VJ628XE-M-00
116