MUTOH Valuevet VJ-628X Maintenance Manual page 22

2.2 Troubleshooting with Error Messages
No. Message Event/symptom
3 E016 TLB-L/I Data border exception/
TLB exception error
［02］
4 E016 TLB-S Data border exception/
TLB exception (store)
［03］
error:
An anomaly is detected
in data border.
Or TLB exception is
detected while storing
data.
5 E016 AddErr-L/I Address exception error
(load or command
［04］
fetch):
Address error is
detected while loading
or fetching command.
6 E016 AddErr-S Address exception error
(store):
［05］
An address error is
detected while
escaping.
7 E016 Pass exception error
BusErr-I (command fetch):
Address error is
［06］
detected while loading
or storing command.
2.2.3 Errors Requiring Reboot
Table 2-3 Symptoms and Check items for CPU System Serious Errors (Continued)
Check item
1. Check AC power supply and printer
peripherals.
2. Check whether the same error occurs. Even
when there is no problem, turn off the printer
and turn it back on a few times to check.
3. Check if the firmware is the latest one.
4. Check the serial number of the printer.
5. MAIN board may be damaged.
Action
• Replace MAIN board.
VJ628XE-M-00
Reference
Operation Manual
"3.5.10Replacing MAIN Board
22