Updating Date And Time - MUTOH Valuevet VJ-628X Maintenance Manual

4.3 Working with MUTOH Service Assistance Software
4.3.4

Updating Date and Time

This section explains the operating procedure which updates the date and time of a printer
using MSA.
NOTE
Before this procedure, make sure to prepare the following:
• Set up the printer, computer and MSA.
"4.3.3Required Environment
• Start the printer on Board manager mode.
"(6)Starting the printer
• Change to Technician mode on MSA.
"(12)Switching to Technician Mode
1
Click [Date and Time Update]on main
window.
2
Click ［OK］to send the systematic
of the computer to the printer, as the
data of year, month, day, and time.
NOTE
After clicking [OK], if any communication errors occur such as wrong IP address or
unplugged LAN cable, an error message appears. If any setting errors occur such
as inappropriate model name selection, serial number registration is not finished
or incorrect one is registered, an warning message appears.
In both cases, communication with printer shall be interrupted.
Click [OK] to return to main menu.
3
Once transmission has started, the
「Progress」window is displayed.
4.3.4 Updating Date and Time
NOTE
When an error message is displayed during updating, if it clicks [OK], it will return
to a main window.
4
Once transmission has completed,
the「Date and time update」 window
is displayed.Click [OK] to close the
window.
5
Make sure that the time displayed on the panel of the printer has been changed.
"5.4.9Time Check Menu
VJ628XE-M-00
196