Inspection; Disassembly And Assembly - Case 580SR Service Manual

www.maskinisten.net
2.4

INSPECTION

Inspect the splines on the converter hub for wear or
damage and the weld joints for cracks. If the hub is
worn or damaged and/or the weld joints cracked, a
new converter must be installed. A new drive plate
should also be installed if it is warped.
2.5

DISASSEMBLY AND ASSEMBLY

DISASSEMBLY
Remove the drive plate screws.
Remove the drive plates.
Remove the torque converter assy.
SECTION 17 - TORQUE CONVERTERS
Copyright ©
9