Special Setups With Multiple Dad-Mwds; Two Detectors Of Same Type (E.g. G1315C/D And G1315C/D); Two Detectors Of Similar Type (E.g. G1315C/D And G1315A/B) - Agilent Technologies 1260 User Manual

5
Using the Detector

Special Setups with Multiple DAD-MWDs

Special Setups with Multiple DAD-MWDs

The G1315C/D and G1365C/D detectors are based on the same new hardware/electronic
N O T E
platform.
The G1315A/B and G1365A/B detectors are based on the old hardware/electronic
platform.

Two detectors of same type (e.g. G1315C/D and G1315C/D)

If you have two G1315C/D DAD or G1365C/D MWD in the same system then
you can rearrange the order in the menu Instrument - Configure 1200 Access to
assign a specific detector as detector 1 and 2.
The diagnostics, tests and OQ/PV should be done with only one detector configured.
N O T E

Two detectors of similar type (e.g. G1315C/D and G1315A/B)

If you have similar detectors in the same system, the G1315C/D will be
automatically always detector 2 while the G1315A/B is detector 1 independent
from its location in the stack. This cannot be changed.
114 Agilent 1260 Infinity DAD and MWD User Manual