Advertisement
Do Not Remove These Items Now!!
Lower Drawer
Release Lever
Do not touch now!!
! At this time,
circles, and
! Remove the tape that holds the transfer belt release lever, and
remove the lever. We will use this later during installation.
Slide 63
# This is what you see when you open the front cover.
# The transfer belt release lever is taped in a temporary shipping location, as
shown here. We remove it now and put it in the correct position later.
# The other lever in the diagram is the lower drawer release lever.
# Normally during installation, you tear out all the retainers. But do not do this for
this machine.
# If you pull out the two retainers that are shown above, you will damage the image
transfer belt. This is because, at this time, the belt is not under tension, and if
you pull the drawer unit out, you will damage the belt.
# We remove these retainers after we remove the faceplate.
Transfer Belt Release Lever
Remove and keep in a safe place
do not remove the two retainers shown in red
do not try to pull out the drawer
V-C3 field service manual, Installation, Copier, Installation,
63
unit.
Internal Tapes and Packing Material
V-C3 Training
Advertisement
