Ricoh V-C3 Technical Training Manual page 540

2.2 Energy Saver Mode: Sleep Mode – 1
! Sleep mode is used instead of auto off mode
when a printer/scanner or fax unit is installed.
! The machine enters sleep mode when one of the
following is done.
! When the machine enters sleep mode, no power
is supplied to the printing engine, and almost
none to the controller.
! Recovery time
Slide 540
No additional notes
2. Energy Saving
" The auto off timer runs out after the last job.
" The operation switch is pressed to turn the power
off.
" Model V-C3a: Less than 90 seconds
" Model V-C3b: Less than 75 seconds
540
V-C3 Training