Ricoh V-C3 Technical Training Manual page 439

! The feed motor cannot be replaced easily.
Because of this, an assembly is available as a
spare part.
! The FRR rollers for trays 1, 2, and 3 are the same.
But the rollers for the bypass tray and the ADF
are different from these rollers.
Slide 439
Tandem tray paper size change
# The users cannot do this themselves.
# Don't forget to change the SP mode setting after changing the size. The users do
not have a user tool to do this if you forget.
# Do the copy adjustments after changing the paper size.
Pick-up, feed, and separation rollers
# The rollers in trays 1 to 3 are different from those in the by-pass tray and optional
LCT.
Separation roller pressure adjustment
# Note the use of this adjustment to solve feed problems at the feed-in area.
Replacement Procedures
439
V-C3 Training