Advertisement
2.2 Energy Saver Mode: Panel Off Mode – 1
! The machine enters panel off mode when one of the
following is done.
" The panel off timer runs out after the last job.
» The panel off timer is controlled by User Tools: Timer settings.
" The Energy Saver key is held down for a second.
! The machine is still in the stand-by (ready) condition, but
turns off the LCD of the operation panel.
! The machine recovers to the ready condition if one of the
following occurs:
" The Energy Saver key is pressed
" An original is placed in the ADF
" The ADF is lifted
" The user touches the operation panel
" The front door is opened or closed
Slide 537
# In some MFP models, when it takes 1 minute to return from Off/Sleep mode,
there may be no Panel Off Mode
# Also, there is no Panel Off Mode in printers.
2. Energy Saving
537
V-C3 Training
Advertisement
