Advertisement
When is Process Control Done? - 2
! After a specified idle time (set by SP 3540-2), if certain
conditions are met (controlled by SP 3555)
! Before ACC (Auto Color Calibration)
! After TD sensor initialization
Slide 401
No additional notes
" When the user does the ACC procedure, process control is
automatically done before ACC starts.
» This takes between 10 seconds and 180 seconds.
" SP3501 004 can disable this process control. It can also
make the machine do only the potential control adjustment
before ACC (the toner density adjustment is not done in this
case).
" The TD sensor is initialized after SP3801 or SP3811 is
executed.
» SP 3811 and 3801 are done after replacing certain
combinations of parts – see Replacement and Adjustment –
PCU.
» SP 3811 is also done during the installation procedure.
401
V-C3 Training
Advertisement
