Ricoh V-C3 Technical Training Manual page 283

! Scanner motor: Drives the scanners
! Scanner home position sensor: Detects when the scanner
is at home position
Slide 283
# The main points are on the slide.
# The scanner speed depends on the reproduction ratio. The speed is double the
normal speed when returning to home position.
# The first scanner contains the exposure lamp, reflectors, and the 1st mirror. The
second scanner contains the 2nd and 3rd mirrors.
# The second scanner moves at half the speed of the first scanner. This is to
maintain the focal distance between lens and original.
# In this machine, wires are used instead of timing belts. These are more difficult to
replace, but copy quality is better (less jitter).
Drive
283
V-C3 Training