Ricoh V-C3 Technical Training Manual page 68

After Removing the Faceplate –
Remove Those Retainers
Pull here.
The rod comes out.
! Do not pull the drawer unit out until after you remove the
stabilizing rod (attached to the red tag).
! Pull the tag by the reinforced ring part. If not, you could pull
the wire off.
Slide 68
# The rod releases the cleaning blade for the transfer belt. It also protects the ITB
and PTR during shipping.
V-C3 field service manual, Installation, Copier, Installation,
68
Shipping Retainer Removal
V-C3 Training