Ricoh V-C3 Technical Training Manual page 472

Applying the Lubricant Powder to the ITB
! First, apply lubricant while you turn the knob anti-clockwise.
" The belt must be turned one complete rotation.
" The lubricant powder goes past the cleaning blade, and is not
removed by the blade.
! Then, turn the lever to the 'up' position.
! Then turn the knob clockwise for one rotation
" This makes sure that the edge of the cleaning blade gets sufficient
lubricant.
" The cleaning blade removes the powder.
Slide 472
# The lever should be up for clockwise rotation.
# For the anti-clockwise rotation, the lever can be up or down
V-C3 field service manual, Removal and Adjustment, Image
Transfer Unit, Reassembling the Belt Unit and Belt Cleaning
472
V-C3 Training
Unit