Ricoh V-C3 Technical Training Manual page 178

! After you replace this part, you must apply
lubricant.
! Apply a mixture of yellow toner (from the V-C1
series) and lubricant powder, as explained in the
service manual.
! The yellow toner must come from a bag of fresh
toner, and not from the toner supply port of a V-
C1 series model. This could contain developer,
and will damage the drum and ITB.
! DO NOT USE YELLOW TONER FROM THE V-C2
OR V-C3 SERIES. THIS CONTAINS CARRIER
AND WILL DAMAGE THE MACHINE.
Slide 178
The next few slides show how to apply the lubricant powder.
Lubricant Brush Roller Replacement
" Lubricant powder: Use Zinc Stearate (D0159501)
for this procedure, and for this procedure only.
178
V-C3 Training