Ricoh V-C3 Technical Training Manual page 181

Lubricant Brush Roller Replacement
" 5. Apply the mixture of powders as shown by the arrow.
" 6. At the same time, turn the gear as shown, so that lubricant is
applied to the whole surface of the roller.
! IMPORTANT:
" 1. Use a brush to apply the powder if one is available. If a brush is
not available, use your finger.
" 2. Only use this mixed powder for the PCU lubricant brush roller of
the V-C2 or V-C3. Never apply this powder to another part or
another model.
Slide 181
# The slide shows how to apply the mixture of powders to the lubricant brush roller.
See the service manual for detailed instructions.
Apply Lubricant Powder - 3
V-C3 field service manual, Removal and Adjustment, PCU,
PCU Blades and Rollers, After Replacement
181
V-C3 Training