Ricoh V-C3 Technical Training Manual page 267

Entrance
Roller
Feed
Roller
Interval
Sensor
Pre-scanning
Roller
Slide 267
Here is a summary of the skew correction methods.
1. Skew correction sensor/entrance roller
Duplex Scanning
Simplex Scanning
Skew is always corrected with method 1 for every job, regardless of the paper
size and mode.
2. Interval sensor/pre-scanning roller stop correction
Duplex Scanning
Simplex Scanning
Use SP6020 (ADF Contact Mode In/Out) to enable skew correction method 2
for all jobs to ensure accurate original feeding. However, switching this feature
on slows original feed slightly.
3. Interval sensor/pre-scanning roller slow-down correction
Duplex Scanning
Simplex Scanning
Skew Correction - 2
! Second skew correction location:
Interval sensor/pre-scanning roller
B6, A5, HLT Larger Than A5
Yes
Yes
B6, A5, HLT Larger Than A5
Yes
Yes
B6, A5, HLT Larger Than A5
No
No
267
Skew Correction
Sensor
Yes
Yes
Yes
No
No
Yes
V-C3 Training