Advertisement
Installing the Cover Interposer
! First, dock the transport unit of the cover interposer to the
copier.
" Important: Do not put the tray unit on the top of the cover
interposer at this time.
! Then, install and dock the next device to the left of the
cover interposer.
" This can be the folding unit or the B830 finisher.
" In this course, it will be the folding unit.
! Finally, attach the tray unit to the top of the cover
interposer.
" The tray unit is supported by the cover interposer, and the
next unit to the left.
" Do not attach the feed unit to the top of the cover interposer
until after you dock the next device to the left of the cover
interposer.
Slide 139
V-C3 field service manual, Installation, Cover Interposer Tray
139
V-C3 Training
CI5000 (B835)
Advertisement
