Ricoh V-C3 Technical Training Manual page 96

Toner Cartridge Installation
1
2
! The label on the cartridge must face the front.
! The ID chip terminals also face the front.
! Shake the cartridge up and down (not side to side) 10 times.
" Do not squeeze. This will form clumps in the toner.
" Do not hold the cartridge upside down.
! Make sure that you install the cartridges in the correct bins.
" There are decals on each bin.
Slide 96
V-C3 field service manual, Installation, Copier, Installation,
STC (Soft Toner Cartridge) Installation
96
V-C3 Training
Label
ID Chip
Terminals