Advertisement
! After you install the new disk:
! If the HDD encryption unit is installed, the user
must copy the encryption key from the controller
to the new hard disk.
Slide 252
No additional notes
Hard Disk Replacement - 3
" Format the hard disk (SP 5832 001).
" Do SP5853 to copy the preset stamp data from
the firmware to the hard disk. Then turn the main
power switch off/on.
" If you successfully retrieved the address book
data from the disk with SP5846 51, do SP5846
52 to restore the address book data to the new
disk.
" This is not a service procedure, so it is not in the
service manual.
252
V-C3 Training
Advertisement
