Advertisement
! When you dust the surface of a new drum,
cleaning blade, or transfer belt, use only
Lubricant Powder B1329700 (specially designed
for this machine).
! Do not use the setting powder that was used for
previous machines.
! Do not use the yellow toner from this machine
because it contains carrier. The carrier will
damage the drum and ITB.
! However, the yellow toner of the V-C1 series can
be used for lubrication.
Slide 473
# This was explained in the PCU section.
# The V-C1 series was not sold in some areas, but the toner is available as a
service part (see below).
# Part numbers of required lubricants
$ G104 YELLOW TONER (D0159500) – this is the V-C1 yellow toner
G104 yellow toner – this is just the name. It has nothing to do with a
model code G104!
$ ZINC STEARATE (D0159501) – this is for the PCU lubricant brush rollers
$ ZINC STEARATE (B1329700) – this is for the other procedures that require
zinc stearate.
Lubricant Powder
473
V-C3 Training
Advertisement
