Ricoh V-C3 Technical Training Manual page 148

Where Skew and Side-to-Side
Registration Are Measured
! At the exit of the copier and some peripherals, you can measure
the skew and registration at two locations, as shown above.
! At both locations, use the two scales to measure the amount of
skew or deviation in side-to-side registration.
! Important! There are two scales. The one at the rear is for DLT
paper, and the one at the front is for A3 paper. Use the correct
scale.
Slide 148
# To get access to the measurement point in the booklet finisher, you must remove
the upper cover of the booklet finisher.
148
V-C3 Training