Ricoh V-C3 Technical Training Manual page 107

Add Paper to Trays 1-3
! Tray 1: Tandem Tray
" The default is set for each region (for example, A4 for
Europe/Asia).
! Trays 2 and 3: These are universal trays. They can detect a
lot of standard paper sizes, but you must put the side and
end fences in the correct positions.
! To use a non-standard or custom size, you must input the
required size with a user tool.
" The default setting of this user tool is 'Auto Detect'. This
uses the input from the sensor.
" We will see this again in the Paper Feed section of the
course. At this time, please use a standard paper size and
move the fences to the correct positions.
" Put A3 or DLT paper in one of the trays. We need it for the
next step.
Slide 107
V-C3 field service manual, Installation, Copier, Installation,
107
V-C3 Training
Load the Paper Trays