Ricoh V-C3 Technical Training Manual page 101

Initializing Developer and Toner
! Open the front door, then turn the power on.
" Then, the machine will not start the initial process
control self-check.
" If the front door is not open, the drums will turn
with no toner in the PCUs.
" If the drums turn with no toner in the PCUs, this
can cause the cleaning blades to catch on a dry
drum and cause damage to the drum surfaces.
! Then, 'Open Cover' will be shown on the display.
Then, you can close the front door.
" You can hear a motor before you close the cover.
This is the fusing unit. The PCUs do not turn at
this time.
Slide 101
# You have to open the door this time.
1. Open the Front Door
101
V-C3 Training