Ricoh V-C3 Technical Training Manual page 359

Drum and Cleaning Blade Replacement
! Re-install the front end of the drum first.
! Do not rotate the drum after you re-install it.
! Use the correct lubricant powders.
! Some SPs must be done.
Slide 359
# The V-C1 series was not sold in some areas, but the toner is available as a
service part (see below).
# Part numbers of required lubricants
$ G104 YELLOW TONER (D0159500) – this is the V-C1 yellow toner
G104 yellow toner – this is just the name. It has nothing to do with a
model code G104!
$ ZINC STEARATE (D0159501) – this lubricant powder is for the PCU
lubricant brush rollers
$ ZINC STEARATE (B1329700) – this is for the other procedures that require
lubricant powder.
V-C3 series field service manual, Replacement and
Adjustment, PCU, Separating Drum/Cleaning Unit /
V-C3 series field service manual, Replacement and
Adjustment, PCU, SP Codes After Replacements
359
V-C3 Training
Removing the OPC Drum