Ricoh V-C3 Technical Training Manual page 157

Adjusting Registration at the Entrance
Adjust this
screw
Slide 157
# This slide shows how side-to-side registration can be adjusted at the entrance of
the cover interposer.
$ The adjustment is made on the trays, not on the bracket between the
peripherals.
# There is no skew adjustment here. Skew can only be adjusted at the exit from
the cover interposer (see the previous slide)
of the B835
! Adjust the screw at the
! The tray can be moved a
Bracket
157
side of the tray
" Turn clockwise: The tray
moves to the front
" Turn anti-clockwise: The
tray moves to the rear
maximum of 2 mm in
either direction.
" To see the current
setting, remove the tray
cover and look at the
scale on the bracket.
V-C3 Training