Ricoh V-C3 Technical Training Manual page 272

Feed Timing and Jam Detection
Separation Sensor
Interval
Sensor
Registration Sensor
! Feed timing controlled by the separation and registration sensors
! Jam detection at the skew correction, separation, interval, registration,
and exit sensors
Slide 272
# Jam Type
Separation
sensor
Skew
correction
sensor
Interval
sensor
Registration
sensor
Exit sensor
Separation
sensor
Skew
correction
sensor
Interval
sensor
Registration
sensor
Exit sensor
If a problem occurs in the ADF, either SC700 or SC701 will be issued.
Exit Sensor
Check in Remains off after enough time for the original to
failure feed twice the distance from the original setting
position to the separation sensor.
Check in Remains off after enough time for the original to
failure feed twice the distance from the separation sensor
to the skew correction sensor.
Check in Remains off after enough time for the original to
failure feed twice the distance from roller [F] to the interval
sensor.
Check in Remains off after enough time for the original to
failure feed twice the distance from the skew correction
sensor to the registration sensor.
Check in Remains off after enough time for the original to
failure feed twice the distance from the registration sensor
to the exit sensor.
Check out Remains on after enough time for a 610 mm (24")
failure original to feed (except when the user is feeding
custom-sized originals, which can be up to 1260
mm).
Check out Remains on after enough time for the original to
failure feed twice the distance from the separation sensor
to the skew correction sensor.
Check out Remains on after enough time for the original to
failure feed twice the distance from the interval sensor to
the skew correction sensor.
Check out Remains on after enough time for the original to
failure feed twice the distance from the skew correction
sensor to the registration sensor.
Check out Remains on after enough time for the original to
failure feed twice the distance from the registration sensor
to the exit sensor.
272
Cause
V-C3 Training