Ricoh V-C3 Technical Training Manual page 119

Installing the A4/LT Large Capacity Tray
! First, you must install the LCT Adapter.
" This procedure removes the casters from the
LCT. This makes it more difficult to move the
machine.
! Then install the LCT.
" Do not put the LCT on its right side (the open
side), or you will bend the ground plate
! The side fences are set for A4. If you want to
change this to LT, to the procedure as shown in
the service manual.
" The customer cannot do this.
! Select the correct paper size with SP 5959 002.
Slide 119
# This is the same LCT as the MT-C2.
# But in the V-C1/V-C2, the paper feed slot is at a different position at the side of
the machine. Because of this, we must install the LCT adapter first. If not, the
LCT feeds the paper into the metal plate at the side of the machine.
(B473)
V-C3 series service manual, Installation, LCT (B473)/LCT
119
V-C3 Training
Adapter (B699)