Ricoh V-C3 Technical Training Manual page 233

V-C3 Training
Toner Hopper, Faceplate, and PCU
PCU Removal - 1
! Before you start to remove a PCU, turn the main power off and
disconnect the power cord.
! The OPC drum is exposed on the bottom of the PCU.
! Do not put your hand under the PCU.
! Do not put the PCU on a surface other than the PCU stand.
" The PCU stand is mounted on a rack attached to the bottom of the
copier with magnets. You must take it out and put it on a flat surface.
Slide 233
No additional notes
233