Advertisement
Energy Saver Modes
Energy Saver Mode
(Panel Off)
Low Power Mode
Sleep Mode
Slide 534
# When the machine is not being used, the machine enters energy saver mode to
reduce the power consumption by turning off the LCD of the operation panel and
lowering the fusing temperature.
# The area shaded green in this diagram represents the amount of energy that is
saved when the timers are at the default settings. If the timers are changed, then
the energy saved will be different. For example, if the timers are all set to 240
minutes, the green area will disappear, and no energy is saved before 240
minutes expires.
2. Energy Saving
2.1 Overview – 1
Power
Consump.
Warm-up
Operation Mode
Ready Mode
Panel Off Mode
Low Power Mode
Off/Sleep Mode
Plug-in
Description
The machine is still in the Copy Ready condition.
Level 1: Panel off only
Level 2: Panel off and lower the fusing temperature.
The fusing temperature is lowered to the prescribed temperature (below ready
temperature).
When a printer/scanner or fax unit is installed:
No power is supplied to the printing engine, and almost none to the controller.
534
Energy
saving!!
V-C3 Training
Advertisement
