Ricoh V-C3 Technical Training Manual page 98

Important Note about Initialization
! When installing this machine, we use SP 3811 to
initialize the TD sensor after adding developer.
! SP3811 does a number of things, including
initialization of the TD sensor.
! You must not initialize the TD sensor again.
! Do SP3811-1 only once.
! SP 3801 also initializes the TD sensor. Never do
SP3801-1 (Init TD Sensor) after doing SP3811. If
the TD sensor is initialized twice this will cause a
fatal error in toner supply control.
Slide 98
No additional notes
98
V-C3 Training