Advertisement
Charge Roller Replacement
! The Y, M, and C charge rollers should always be replaced
together as a set, even if you only have to replace one of them.
! The charge rollers are marked on the tip of one end with a red
stamp (1) and with a red ring around the sleeve on the other end
(2).
" These markings distinguish the D081/D082 YMC PCU units from
PCU units of previous machines.
" Always replace a PCU unit with a unit that has these markings. Do
not use a PCU unit for a previous machine.
Slide 358
# Replace all three charge rollers as a set: Tests have shown that this is the best
way to avoid some image problems that are caused by the charge roller.
358
V-C3 Training
Advertisement
