Advertisement
! The PCU stand is stored under the machine.
! Use this when you disassemble the PCU:
" It protects the drum from damage and exposure to light
while the PCU is out of the machine
" It keeps the OPC aligned correctly so the development unit
can be reattached.
! The shape is different from the stand for the V-C1. Do not
use a V-C1 stand for this new machine, or you could
damage the drum.
" The color is also different (V-C1: grey, V-C2/V-C3: off-
white)
! The PCU stand for this machine stores only two special
tools (required for developer replacement).
" There is no special tool for drum motor replacement.
! The PCU stand must remain attached to the bottom of the
main machine at the customer site.
Slide 351
# If a PCU stand for the V-C3 is not available, you can use a PCU stand for the V-
C2 (it is identical). But do not use a PCU stand for the V-C1.
PCU Stand
351
V-C3 Training
Advertisement
