Ricoh V-C3 Technical Training Manual page 4

! Product Outline
! Installation
! Maintenance
! Machine Overview
! Automatic Document Feeder
! Scanner
! Image Processing
! Laser Unit
Slide 4
PRODUCT OUTLINE
# The model will be introduced.
# The optional peripherals will be introduced.
# The product concept, sales points, and targets will be presented.
# The main specifications will be mentioned during this section of the course.
INSTALLATION
# Study how to install the machines and the peripherals.
# Study how to access SP modes and user tools.
# Study how to update the firmware.
MAINTENANCE
# PM is described briefly.
MACHINE OVERVIEW
# The components will be discussed.
# The paper feed path and copying process will be outlined.
# The machine's organization and overall PCB structure will also be covered.
DOCUMENT FEED
# The ADF is a standard component of the machine.
# This section of the course will explain the ADF's mechanisms.
SCANNER
# The scanner mechanism will be discussed.
IMAGE PROCESSING
# This section briefly explains the image processing done inside this machine.
LASER UNIT
# The laser diode circuits and laser optics will be described.
Course Overview
4
V-C3 Training