Ricoh V-C3 Technical Training Manual page 151

! Skew and side-to-side correction can be done
only where the unit is docked to the upstream
unit with the adjustment bracket (see the
previous slide).
! After installing each peripheral device, do some
test prints. Check for skew, and check that side-
to-side registration is correct.
! If you detect a problem with skew or side-to-side
registration, do the adjustment on the adjustment
bracket attached to the peripheral unit upstream
of the unit where the problem occurred.
Slide 151
# Upstream: Towards the copier exit
General Rules
151
V-C3 Training