Ricoh V-C3 Technical Training Manual page 483

Heating Roller
Pressure Roller
Hot Roller
! Heating roller:
" Lamp 1 heats the entire length of the fusing belt.
" Lamp 2 heats only the ends of the fusing belt. (Used only
for large paper sizes.)
" Lamp 3 heats only the center of the fusing belt. (Used for
smaller, thick paper sizes; lamp 2 is not used.)
Slide 483
# The NA version of V-C3a does not have the heating roller fusing lamp that heats
the full length of the heating roller (lower lamp in the diagram).
Fusing Lamps
483
V-C3 Training
3
2
1