Advertisement
! When you dust the surface of a new drum,
cleaning blade, or transfer belt, use only
Lubricant Powder B1329700 (specially designed
for this machine).
! After replacing the lubricant brush roller in the
PCU, use Zinc Stearate D0159501 to lubricate the
new roller. – This lubricant was introduced after
the V-C2 was launched.
! Do not use the yellow toner from this machine
because it contains developer. The developer will
damage the drum and ITB.
! The yellow toner for the V-C1 series is required
for the maintenance of this model, when the
lubricant brush roller in the PCU is replaced.
Slide 350
# The V-C1 series was not sold in some areas, but the toner is available as a
service part (see below).
# Part numbers of required lubricants
$ G104 YELLOW TONER (D0159500) – this is the V-C1 yellow toner
G104 yellow toner – this is just the name. It has nothing to do with a
model code G104!
$ ZINC STEARATE (D0159501) – this is for the PCU lubricant brush rollers
$ ZINC STEARATE (B1329700) – this is for the other procedures that require
zinc stearate.
Lubricant Powder
350
V-C3 Training
Advertisement
