Ricoh V-C3 Technical Training Manual page 108

Notes concerning Trays 2 and 3
! If the user does not put the fences at the correct
position, a jam can occur.
! To use a paper size that is not in this table, select
the size with this user tool: System Settings>
Tray Paper Settings >Tray Paper Size.
! Note that SP 5112 must be set to 'enabled' or
non-standard sizes cannot be selected for trays 2
and 3.
Slide 108
No additional notes
" If the paper size is not the same as the setting, a
jam can occur.
108
V-C3 Training