Ricoh V-C3 Technical Training Manual page 5

! Processes Around the Drum
! Toner Supply Mechanisms
! Waste Toner Collection
! Process Control
! Paper Feed
! Transfer and Separation
! Fusing
! Paper Exit/Duplex
Slide 5
PROCESSES AROUND THE DRUM
# This section describes the drum and the processes around it, including
quenching, charge corona unit, and drum cleaning.
TONER SUPPLY
# The toner supply mechanism will be described.
# The toner near-end and toner end detection methods will be discussed.
WASTE TONER COLLECTION
# Waste toner collection will also be discussed. There is no recycling.
PROCESS CONTROL
# This section explains the basic points about how the machine controls the copy
process to compensate for changes in operating conditions.
PAPER FEED
# The paper feed mechanism for the main body will be described. The optional
LCTs will be dealt with in later sections.
TRANSFER & SEPARATION
# Image transfer and paper separation mechanisms will be described.
FUSING
# Fusing will be described.
PAPER EXIT/DUPLEX
# The paper feed out and duplex mechanisms will be described.
# The duplex tray is a standard component of this model.
Course Overview
5
V-C3 Training