Ricoh V-C3 Technical Training Manual page 160

Slide 160
# Other cards can be copied to the card in the upper slot. But if Postscript 3 is
installed, put the Postscript 3 card in the upper slot and move the other
applications to the Postscript card.
SD Card Slots
! Upper slot: All application SD cards
" If more than one SD card application is
Upper used, it must be merged to the card in
the upper slot.
Slot
" The PostScript 3 card must not be
copied. If PostScript 3 is installed, the
PostScript 3 card must stay in the upper
Lower
slot and other applications must be
Slot
merged to it.
" Browser unit, HDD encryption unit (the
SD card is removed after installation)
! Lower slot: A VM card is inserted here at
the factory. This slot is also used for
service procedures
" Firmware updates
" NVRAM downloads
" As the source when merging
applications on one SD card.
V-C3 field service manual, Installation, MFP Controller
160
V-C3 Training
Options, Overview