Advertisement
Install the 2000/3000-sheet Finisher
! First, remove shipping retainers and packing material from the
finisher
! Then dock the finisher with the copier.
" The details of this procedure depend on whether you will install
the cover interposer tray.
" The sponge cushion must not block the air duct (see the
diagram in the manual).
" Be careful not to damage the entrance guide plates when you
move the finisher against the copier.
! Attach the trays
! Make the finisher level, and attach the support tray.
! Select the staple supply names for the two types of stapler.
" These names are a reference for the customer when they need
to order new staples.
" The names appear on the screen if they press User Tools –
Inquiry.
Slide 135
# The support tray makes the outputs flat. This is necessary because if the paper
curls in the output tray, then the tray full sensor will turn on too early.
# Install the Punch Unit (B702) and the Jogger Unit (B703) for these finishers.
(D373/D374)
V-C3 field service manual, Installation, 2000/3000 Sheet
135
V-C3 Training
Finishers (D373/D374)
Advertisement
