Advertisement
Installing The Controller Options - 4
! Browser Unit
! HDD Encryption Unit
Slide 169
No additional notes
" During the installation procedure, you must put an SD card
with the browser unit firmware into the upper slot.
" The machine copies firmware from the SD card to the hard
disk during the installation procedure.
" You must remove the SD card from the upper slot after you
install the browser unit
" Before you can install this unit, the customer must store
some names and passwords related to authentication.
" Check the box to make sure that the VOID marks are not
visible on the packing tape.
" Enable the unit with SP 5878 002.
" Remove the SD card from the upper slot after installation.
169
V-C3 Training
Advertisement
