Advertisement
Installing the B830 Finisher
! First, install the D375 finisher adapter.
" This contains a bracket and timing belt assembly to match
the finisher with the line speed of the D014 copier.
" The bracket is identical to the one that is installed in the
finisher, but the one in the finisher must be removed and
discarded.
! Then install the finisher.
! Then dock it to the next unit (z-folding unit, cover
interposer, or copier).
! Update the firmware for the finisher.
" Download the latest firmware from the website and copy it
to the SD card.
" The SD card that comes with the finisher may contain
firmware that is out of date. Do not use this one unless you
have no choice.
! Install the punch unit (B831).
Slide 142
# This finisher was designed for a different product. So the finisher adapter is
needed.
# The procedure for the punch unit is the same as the one for the B234 series
(Katana-C1)
V-C3 series service manual, Installation, 3000-Sheet Finisher
142
(B830)/Finisher Adapter (D375)
V-C3 Training
Advertisement
