Ricoh V-C3 Technical Training Manual page 542

2.2 Energy Saver Mode: Sleep Mode – 3
!
The machine recovers to the ready condition:
" If the operation switch is pressed
» The operation panel lights. When warm-up is finished, the machine
» Then, after the job is completed, the machine returns to sleep mode
Power
Consump.
Warm-up
Plug-in
Slide 542
# This timing chart shows what happens if the data is received while the machine
in sleep mode.
2. Energy Saving
goes to the ready condition.
when the auto off timer runs out or the operation switch is pressed.
Warm-up
Operation Mode
Ready Mode
Panel Off Mode
Low Power
Mode
Off Mode
542
Operation Mode
Ready Mode
Panel Off Mode
Low Power
Mode
Off Mode
Operation switch is
pressed.
V-C3 Training
Time