Advertisement
! Always use Lubricant Powder (B1329700) (composed of
Zinc Stearate).
" One exception: After replacing the lubricant brush roller in
the PCU, use G104 Yellow Toner (D0159500) and Zinc
Stearate D0159501 to lubricate the new roller.
» Zinc Stearate D0159501 was introduced after the V-C2 was
! Never use the previous Setting Powder (54429101) in any
service procedure for the V-C3.
! Some procedures require that you use yellow toner as a
lubricant. Never use V-C2 or V-C3 yellow toner as a
lubricant.
" The yellow toner for these models contains carrier, and this
will damage the drum and other components.
" The yellow toner for the V-C1 models is required for the
maintenance of this model, when the lubricant brush roller
in the PCU is replaced.
Slide 177
# B132 series yellow toner is needed when you replace the lubricant brush roller in
the PCU. The B132 series was not sold in some areas, but the toner is available
as a service part (see below).
# Part numbers of required lubricants
$ G104 YELLOW TONER (D0159500) – this is the V-C1 yellow toner
G104 yellow toner – this is just the name. It has nothing to do with a
model code G104!
$ ZINC STEARATE (D0159501) – this is for the PCU lubricant brush rollers
$ ZINC STEARATE (B1329700) – this is for the other procedures that require
zinc stearate.
Lubrication - Copier
launched.
177
V-C3 Training
Advertisement
